[. . . ] 8 Read the manuals in the “Manual” folder of the provided CD-ROM. The lightning flash with arrowhead symbol, within a triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. [. . . ] If it gets into your eye, bathe your eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your clothing may cause a skin irritation or damage your eye. 2 Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, 0.  severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system.  o not stay in contact with the parts of the product that become hot for long periods of time. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: PC/AV DVI-D output terminal, PC/AV DVI-D input terminal, PC/AV HDMI input terminal, PC D-SUB input terminal, PC RGB input terminals, and RS-232C input/output terminals. If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using fixing devices like wall mount brackets recommended by the manufacturer. € Ensuring the monitor is not overhanging the edge of the supporting furniture. €  ot placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the N monitor to a suitable support. € Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized ACER dealer. Our company will bear no responsibility for accidents or injuries caused by improper mounting or mishandling. If necessary, the monitor may be tilted up to 20 degrees upward or downward. € When mounting the monitor horizontally, the optional fan cover (PN-ZR31) is required. For details along with the horizontal mounting conditions, consult your dealer. € This monitor should be used at an ambient temperature between 32°F (0°C) and 104°F (40°C). When installing the monitor inside a housing, or if the ambient temperature may be outside of the range of 32ºF (0ºC) to 104ºF (40ºC), install a fan or take other measures to keep the ambient temperature within the required range. € Temperature condition may change when using the monitor together with the optional equipments recommended by ACER. In such cases, please check the temperature condition specified by the optional equipments. If the temperature inside the monitor rises, this could lead to a malfunction. € Adhere to the following when installing the monitor in its portrait orientation. [. . . ] DATE/TIME SETTING / / : : Turning on the main power SET 01 / 01 / 20 11 12 : 00 AM CANCEL Main power switch OK· [MENU] Caution • The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch is on. € When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. Turning power on/off Press the POWER button on the remote control unit or the monitor itself to turn the power ON/OFF. [. . . ]